Application Fabric Pneumatic Bursting Tester, to determine the bursting pressure of fabrics uses pneumatic test method, including knits, woven fabric, non-woven fabric, laminated fabric and other craft-made fabric A test specimen is clamped over and expansive diaphragm by a circular clamping ring, increasing compressed air pressure is applied to the underside of the diaphragm, causing distension of the fabric until the test specimen bursts, the bursting strength and distension are determined.

Real time Testing-curve is shown on the Bursting software, The machine can be also controlled easily by the graphics touch-screen without additional computer.

 

The TF142C is the best Pneumatic Bursting Machine in the world, with its latest and advanced technology, user-friendly design, and high quality components and parts, TF142C offers the most convenient operation: 1 total automatically preliminary test (trial test) only, the system will calculate and adjust to reach the perfect pressure raising rate to burst the specimen within 20+/-5s, and as far as possible to protect the membrane. Take the normal tests for 3 times, and 1 time membrane test (system will raise pressure to the membrane until the average height of the 3 times normal tests, record the pressure value of the membrane), All the information of test, burst time (resolution 0.01s), burst height (0.01mm), burst strength (0.001mPa), test-pressure-curve, pressure raising rate, and others are real-time displayed on the computer, the test results will automatically calculated, the Min, Max, Average values, CV%, of height, pressure and time, etc.
 
Specification

Specifications/ Features 

Computer & Special software controlled, automatic clamping and burst test, automatic calibration, automatic data processing and test report output.

           It can be controlled by its easy to use LCD graphics touch-screen instead of computer.

           Bursting pressure up to 1500KPa (15Bar or 200psi), accuracy ≤ ±0.2%F•S
           Burst distension up to 70mm
           Equipped with lamp for clear observation.
          Transparent acrylic cover ensures safe operation
         4 most commonly used test areas are available and be easily shifted
Test area: 100, 50, 10, 7.3 cm2 (112.8, 79.8, 35.7, 30.5 mm Dia.)

 

 

Real time Testing-curve is shown on the Bursting software, The machine can be also controlled easily by the graphics touch-screen without additional computer.

 

The TF142C is the best Pneumatic Bursting Machine in the world, with its latest and advanced technology, user-friendly design, and high quality components and parts, TF142C offers the most convenient operation: 1 total automatically preliminary test (trial test) only, the system will calculate and adjust to reach the perfect pressure raising rate to burst the specimen within 20+/-5s, and as far as possible to protect the membrane. Take the normal tests for 3 times, and 1 time membrane test (system will raise pressure to the membrane until the average height of the 3 times normal tests, record the pressure value of the membrane), All the information of test, burst time (resolution 0.01s), burst height (0.01mm), burst strength (0.001mPa), test-pressure-curve, pressure raising rate, and others are real-time displayed on the computer, the test results will automatically calculated, the Min, Max, Average values, CV%, of height, pressure and time, etc.
 
Specification

Specifications/ Features 

Computer & Special software controlled, automatic clamping and burst test, automatic calibration, automatic data processing and test report output.

           It can be controlled by its easy to use LCD graphics touch-screen instead of computer.

           Bursting pressure up to 1500KPa (15Bar or 200psi), accuracy ≤ ±0.2%F•S
           Burst distension up to 70mm
           Equipped with lamp for clear observation.
          Transparent acrylic cover ensures safe operation
         4 most commonly used test areas are available and be easily shifted
Test area: 100, 50, 10, 7.3 cm2 (112.8, 79.8, 35.7, 30.5 mm Dia.)